- Liyu Sc631e Cutting Plotter Drivers For Mac Download
- Liyu Sc631e Cutting Plotter Drivers For Mac Windows 7
Support > Software & Drivers
Sep 02, 2018.
Download Prolific Driver for your Mac OSX Version OR Install the driver for your Mac here without using an adapter, for plotters bought after 22 Sept 2011 excluding the TC631/TC631E: Download FTDI drivers here, for plotters bought after 22 Sept 2011 2. Install SignCut Pro 3. Adobe pdf free for mac. In SignCut Pro press Cutter button on the top and use the following. Corel Draw Printer driver is provided as experimental purpose only and does not work for 64 bits. (Require the above port to setup first in order to work) Soft1 is Graphtec Driver with no blade off-set function so only usable with drawing. Soft2 is Made by Liyu company with blade Off-Set Function SignCut Tutorials.
Cutting Plotters
Software & Drivers
Go to the driver section : Windows driver
Go to the softwares (1) section : Controller, ROBO Master Pro, D-Cut Master
Go to the softwares (2) section : Cutting Master 4, Graphtec Pro Studio, Cutting Master 2, Cutting Master 3, Graphtec Studio
* FC9000, go to the product support page.
* CE7000, go to the product support page.
* CE LITE-50, go to the product support page.
* CE6000 PLUS, go to the product support page.
* FCX2000, go to the product support page.
* FCX4000, go to the product support page.
Go to the softwares (1) section : Controller, ROBO Master Pro, D-Cut Master
Go to the softwares (2) section : Cutting Master 4, Graphtec Pro Studio, Cutting Master 2, Cutting Master 3, Graphtec Studio
* FC9000, go to the product support page.
* CE7000, go to the product support page.
* CE LITE-50, go to the product support page.
* CE6000 PLUS, go to the product support page.
* FCX2000, go to the product support page.
* FCX4000, go to the product support page.
Drivers
Cutting Plotters | Windows Driver | ||||||
---|---|---|---|---|---|---|---|
Windows 7 (32-bits Edition) | Windows 8.1 (32-bits Edition) | Windows 10 (32-bits Edition) | Windows 7 (64-bits Edition) | Windows 8.1 (64-bits Edition) | Windows 10 (64-bits Edition) | Cprrespon- ding model | |
CE6000-40 CE6000-60 CE6000-120 CE6000-120AMO | OPS662 (v3.80) | OPS662 (v3.90) | OPS662 (v3.80) | OPS662 (v3.90) | CE6000 | ||
CE6000-120AP | OPS628 (v10.20) | OPS628 (v10.30) | OPS628 (v10.20) | OPS628 (v10.30) | CE6000 | ||
FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160 | OPS662 (v3.80) | OPS662 (v3.90) | OPS662 (v3.80) | OPS662 (v3.90) | FC8600 | ||
FC2250-60 FC2250-120 FC2250-180 | FC2250 | ||||||
FC4500-50 FC4510-60 FC4550-50 | FC4500 | ||||||
CE2000-60 CE2000-120 | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | CE2000 | ||
CE2000-120AP | CE2000 | ||||||
CE3000-40 CE3000-60 CE3000-120 | CE3000 | ||||||
CE3000-120AP | CE3000 | ||||||
CE3000Mk2-60 CE3000Mk2-120 | OPS662 (v3.00) | N/A | OPS662 (v3.00) | N/A | CE3000Mk2 | ||
CE5000-60 CE5000-120 | OPS662 (v3.00) | OPS662 (v3.00) | CE5000 | ||||
CE5000-120AP | OPS628 (v10.20) | OPS628 (v10.20) | CE5000 | ||||
FC2231-60 FC2231-90 FC2321-EX FC2232-60 FC2232-90 FC2232-EX | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | FC2230 | ||
FC2240-60 FC2240-120 FC2240-180 | OPS662 (v3.00) | N/A | OPS662 (v3.00) | N/A | FC2240 | ||
FC3600-120 | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | FC3600 | ||
FC4200-50 FC4200-60 FC4210-60 | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | FC4200 | ||
FC5100-75 FC5100-100 FC5100-130 FC5100-150 | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | FC5100 | ||
FC5100A-75 FC5100A-100 FC5100A-130 FC5100A-150 | FC5100 | ||||||
FC7000-75 FC7000-100 FC7000-130 FC7000-160 | OPS662 (v3.00) | N/A | OPS662 (v3.00) | N/A | FC7000 | ||
FC7000Mk2-60 FC7000Mk2-75 FC7000Mk2-100 FC7000Mk2-130 FC7000Mk2-160 | FC7000 | ||||||
FC8000-60 FC8000-75 FC8000-100 FC8000-130 FC8000-160 | OPS662 (v3.00) | OPS662 (v3.00) | FC8000 | ||||
FC612-09 | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | FC612 |
Notes/Explanations:
- 1.
- On driver and software, the file is compressed in the ZIP format. It is required to decompress before use.
- 2.
- On driver and software, the language is in English.
- 3.
- On driver and software, the Macintosh OS is not supported exclude the Cutting Master 2 plug-in software.
Softwares
Cutting Plotters | Cutting Plotter Controller | ROBO Master Pro | D-Cut Master | |||
---|---|---|---|---|---|---|
Windows 7 / 8.1 (32 & 64-bits Edition) | Windows 10 (32 & 64-bits Edition) | Windows 7 (32 & 64-bits Edition) | Windows 8.1 / 10 (32 & 64-bits Edition) | Windows 7 (32 & 64-bits Edition) | Windows 8.1 / 10 (32 & 64-bits Edition) | |
CE6000-40 CE6000-60 CE6000-120 CE6000-120AMO | OPS676 (v1.40B) | N/A | N/A | |||
Firmware version 1.60 is required (CE6000 Firmware v2.61) Manual for CE6000-40/60/120/120AMO (CE6000-UM-152-01) | ||||||
CE6000-120AP | N/A | N/A | N/A | |||
Firmware version v1.50 is required (CE6000-120AP Firmware v2.00) User manual for CE6000-120AP (CE6000AP-UM-152-01) | ||||||
FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160 | OPS675 (v1.50B) | N/A | N/A | |||
FC2250-60 FC2250-120 FC2250-180 | N/A | N/A | OPS639 (v2.12) | N/A | ||
FC4500-50 FC4510-60 FC4550-50 | ||||||
CE2000-60 CE2000-120 | N/A | N/A | N/A | |||
CE2000-120AP | N/A | N/A | N/A | |||
CE3000-40 CE3000-60 CE3000-120 | N/A | N/A | N/A | |||
CE3000-120AP | N/A | N/A | N/A | |||
CE3000Mk2-60 CE3000Mk2-120 | N/A | N/A | N/A | |||
CE5000-60 CE5000-120 | OPS664 (v2.20B) | OPS661 (v4.60) | N/A | N/A | ||
CE5000-120AP | N/A | N/A | N/A | |||
FC2231-60 FC2231-90 FC2321-EX FC2232-60 FC2232-90 FC2232-EX | N/A | N/A | OPS639 (v2.12) | N/A | ||
FC2240-60 FC2240-120 FC2240-180 | N/A | N/A | OPS639 (v2.12) | N/A | ||
FC3600-120 | N/A | N/A | N/A | |||
FC4200-50 FC4200-60 FC4210-60 | N/A | N/A | OPS639 (v2.12) | N/A | ||
FC5100-75 FC5100-100 FC5100-130 FC5100-150 | N/A | N/A | N/A | |||
FC5100A-75 FC5100A-100 FC5100A-130 FC5100A-150 | N/A | N/A | N/A | |||
FC7000-75 FC7000-100 FC7000-130 FC7000-160 | OPS664 (v2.20B) | N/A | N/A | N/A | ||
FC7000Mk2-60 FC7000Mk2-75 FC7000Mk2-100 FC7000Mk2-130 FC7000Mk2-160 | ||||||
FC8000-60 FC8000-75 FC8000-100 FC8000-130 FC8000-160 | OPS675 (v1.50B) | N/A | N/A | |||
FC612-09 | N/A | N/A | OPS639 (v2.12) | N/A |
Notes/Explanations:
- 1.
- On driver and software, the file is compressed in the ZIP format. It is required to decompress before use.
- 2.
- On driver and software, the language is in English.
- 3.
- On driver and software, the Macintosh OS is not supported exclude the Cutting Master 2 plug-in software.
- 4.
- On software, it is run in the WOW64 mode when the 64-bits Windows OS is used.
Softwares
Cutting Plotters | Cutting Master 4 | Graphtec Pro Studio | |
---|---|---|---|
Windows 7 / 8.1 / 10 (32 & 64-bits Edition) | Macintosh OS10.7 - 10.15 | Windows 7 / 8.1 / 10 (32 & 64-bits Edition) | |
FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160 | Cutting Master 4 for Windows | Cutting Master 4 for Macintosh | Graphtec Pro Studio for Windows |
FC4500-50 FC4510-60 FC4550-50 | Cutting Master 4 for Windows | Cutting Master 4 for Macintosh | Graphtec Pro Studio for Windows |
Cutting Plotters | Cutting Master 2 | Cutting Master 3 | Graphtec Studio | ||||
---|---|---|---|---|---|---|---|
Windows 7/ 8.1 (32 & 64-bits Edition) | Windows 10 (32 & 64-bits Edition) | Macintosh OS10.4 - 10.10 | Windows 7/ 8.1/ 10 (32 & 64-bits Edition) | Macintosh OS10.5 -10.11 macOS 10.12 | Windows 7/ 8.1/ 10 (32 & 64-bits Edition) | Macintosh OS10.6 -10.15 | |
CE6000-40 CE6000-60 CE6000-120 CE6000-120AMO | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows | Graphtec Studio for Macintosh |
CE6000-120AP | N/A | N/A | N/A | ||||
FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160 | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows | Graphtec Studio for Macintosh |
Firmware version 2.10 or later is required (FC8600 Firmware v3.10) | |||||||
FC2250-60 FC2250-120 FC2250-180 | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows | Graphtec Studio for Macintosh |
Firmware version 3.90 or later is required (FC2250 Firmware v4.50) | |||||||
FC4500-50 FC4510-60 FC4550-50 | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows | Graphtec Studio for Macintosh |
Firmware version 1.92 or later is required (FC4500 Firmware v2.70) | |||||||
CE2000-60 CE2000-120 | N/A | N/A | N/A | ||||
CE2000-120AP | N/A | N/A | N/A | ||||
CE3000-40 CE3000-60 CE3000-120 | N/A | N/A | N/A | ||||
CE3000-120AP | N/A | N/A | N/A | ||||
CE3000Mk2-60 CE3000Mk2-120 | N/A | N/A | N/A | ||||
CE5000-60 CE5000-120 | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows> | Graphtec Studio for Macintosh |
When current firmware is previous of version 3.80, version 3.90 is required (CE5000 Firmware v4.00) When current firmware is version 5.00 or later, version 6.20 is required (CE5000 Firmware v6.40) | |||||||
CE5000-120AP | N/A | N/A | N/A | ||||
FC2231-60 FC2231-90 FC2321-EX FC2232-60 FC2232-90 FC2232-EX | N/A | N/A | N/A | ||||
FC2240-60 FC2240-120 FC2240-180 | N/A | N/A | N/A | ||||
FC3600-120 | N/A | N/A | N/A | ||||
FC4200-50 FC4200-60 FC4210-60 | N/A | N/A | N/A | ||||
FC5100-75 FC5100-100 FC5100-130 FC5100-150 | N/A | N/A | N/A | ||||
FC5100A-75 FC5100A-100 FC5100A-130 FC5100A-150 | N/A | N/A | N/A | ||||
FC8000-60 FC8000-75 FC8000-100 FC8000-130 FC8000-160 | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows | Graphtec Studio for Macintosh |
Firmware version 3.10 or later is required (FC8000 Firmware v3.50) | |||||||
FC612-09 | N/A | N/A | N/A |
Notes/Explanations:
- 1.
- On driver and software, the file is compressed in the ZIP format. It is required to decompress before use.
- 2.
- On driver and software, the language is in English.
- 3.
- On driver and software, the Macintosh OS is not supported exclude the Cutting Master 2 plug-in software.
- 4.
- On software, it is run in the WOW64 mode when the 64-bits Windows OS is used.
- 5.
- In plug-in software Cutting Master 2 and Cutting Master 3, new version will not be released even if the OS or application software is updated. It is recommended using plug-in software Cutting Master 4 corresponded to new OS or application software if possible.
For both Windows and MAC machines, log onto: http://www.ftdichip.com/Drivers/VCP.htm .
Choose the correct set of drivers based on the operating system.
Click the next button to follow instructions:
Liyu Sc631e Cutting Plotter Drivers For Mac Download
CD Driver Installation Path
SC Series (Grey)
D:SC(English)LiyuDrvCH341SER
(For 64bit/Windows7 User use the latest SC_CH341SER below most updated for all system)
TC Series (Black)
D:TC(English)USB Drv
Corel Draw Printer driver is provided as experimental purpose only and does not work for 64 bits.
(Require the above port to setup first in order to work)
Liyu Sc631e Cutting Plotter Drivers For Mac Windows 7
Soft1 is Graphtec Driver with no blade off-set function so only usable with drawing.Soft2 is Made by Liyu company with blade Off-Set Function
SignCut Tutorials
If you have lost the CD this is the back up Drivers.
- SC_CH341SER.zip
- Latest Driver now support all windows systems.
- (80.01 KiB) Downloaded 25254 times
- TC(English).zip
- Same As CD
- (4.08 MiB) Downloaded 140776 times
Once you have configured the USB communication port, you need to configure the cutting software as well. Make sure the Com port in the device manager that you have configured on your computer match the com port in the software, otherwise the cutter wont work. For example: if you have configured COM 1 in device manager, it should be COM1 in signcutpro software. IF COM2 in device manager, should be COM2 in signcutpro software
Signcutpro:
For SC631 non optical eye, click on cutter icon in Signcutpro and this menu pops up. Set the settings according to the image shown below.
For SC631E With optical Eye, click on cutter icon in Signcutpro and this menu pops up. Set the settings according to the image shown below.
![Liyu Sc631e Cutting Plotter Drivers For Mac Liyu Sc631e Cutting Plotter Drivers For Mac](https://sc02.alicdn.com/kf/HTB1zkeKJVXXXXaeXXXXq6xXFXXXd/SUDA-VINYL-cutting-plotter-driver-plotter-cutter.jpg_350x350.jpg)
For PCUT, click on cutter icon in Signcutpro and this menu pops up. Set the settings 9600 or 19200 or 38400 according to the image shown below.
Flexi8 Starter: Coming soon
To set up the stand, follow the video:
![Harga cutting plotter Harga cutting plotter](https://i.ytimg.com/vi/k5AwyGH0iYI/maxresdefault.jpg)